Free · Windows 10 / 11 · No install · No admin rights
Auto Clicker
The same button to click a few hundred times? Auto Clicker clicks the mouse for you on a beat you set, wherever the pointer is or at one to three points you mark on the screen, in turn. Press F6 to start and stop from any window. It never starts clicking by itself and does not read what you type.
What it does
- Any beat. From a click every millisecond to one every 24 hours, with quick presets, and a random extra each time if you don't want a perfectly even beat.
- Left, right or middle button. Single or double click.
- Wherever the mouse is. Move the pointer and the clicks follow it.
- Or one to three points on the screen, in turn. Mark each with the F7 hotkey; the program clicks point 1, 2, 3, then 1 again, on your beat.
- A hotkey to start and stop. F6 works from any window; change it to any of F1–F11 with Ctrl, Alt or Shift. If another program holds that key, you are told.
- Stops by itself. After a number of clicks, after a number of minutes, or never until you stop it.
- You can always stop it. The program never clicks its own window, so the Stop button on the page can be pressed by hand even on a very fast beat.
- Nothing on its own. No clicking when it opens, no schedule, no reading of the keyboard and no typing for you.
Download Auto Clicker
Download AutoClicker-1.0.0.zip
- Version
- 1.0.0
- Date
- 19 Nov 2026
- Size
- 3.3 MB
- SHA-256
- 4d7e4470ece1ab1db50e90234143a881573b27550b4002e9743a38d13611294e
To check the file hasn't been tampered with, compare the SHA-256 above with the output of Get-FileHash AutoClicker-1.0.0.zip in PowerShell.
Getting started
- Download the zip above, right-click it → Extract All… into a folder of your own, such as Documents or a USB stick. Don't run it from inside the zip, and don't keep it in Program Files: the program needs to write files beside itself when it updates.
- Double-click AutoClicker.exe. The first time, a notice about usage statistics appears: read it and click Got it.
- Set Click every (the time between clicks) and choose the mouse button.
- Choose Where to click: Wherever the mouse is or Set points on the screen. For the second, set how many points, then point the mouse at each place in the other program and press F7, one point at a time (no click needed).
- Move the mouse to the program you want and press F6 to start; press F6 again to stop. (The start button in the window counts down 3 seconds first, so you can move the mouse there.)
The first time you run it, Windows may show a blue "Windows protected your PC" screen because the program is not signed with a paid certificate. That doesn't mean it has a virus. If you downloaded it from this site, click More info (the link under the warning), then the Run anyway button that appears (once).
Good to know
- It never clicks Auto Clicker's own window. If the mouse or a marked point is on it, the program pauses and says why; move the mouse or the window away and it goes on.
- Programs started with Run as administrator cannot be clicked. Auto Clicker does not ask for administrator rights, so Windows does not pass its clicks to those windows.
- Games: a game with anti-cheat may ignore the clicks, or treat an auto clicker as against its rules and suspend the account. Read the rules of the game first; using it there is your responsibility.
- Several points: the beat is the time between every click, so 1 second and 3 points make a round in 3 seconds, and "After this many clicks" counts every click, not rounds. The button and the kind of click are the same for all points.
- The mark hotkey (F7) is held only while "Set points on the screen" is chosen. Tick the circle in front of a row to choose which point to mark, or type X and Y yourself. Settings cannot be changed while it is clicking: stop first.
- With set points, the pointer is taken to the point for every click, so using the mouse for something else at the same time is awkward. Press the hotkey to stop first.
- A very fast beat (a few milliseconds) may be more than the other program can take in: it may count fewer clicks than Auto Clicker sent.
- The program has to be open for the hotkeys to work. Closing the window stops the clicking and gives the hotkeys back.
Requirements
- 64-bit Windows 10 or Windows 11. Clicking needs no internet connection (the internet is used only for ads, usage statistics and updates).
- The program's window uses WebView2, which comes with Windows (without it, the program opens in your default browser instead).
- The program is in English or Thai: it picks the language from Windows and you can switch under ⚙️ Settings → ภาษา / Language.
Ads and removing them
Every feature of Auto Clicker is free. It shows a small ad bar at the bottom of the window (one line of text, or a picture of 468×60, 728×90, 970×90 or 320×50, scaled down when the window is narrow) and, when the window is wide enough, an ad box beside the settings (text, or a picture of 300×250 or 300×600, scaled down to fit the window's height). To remove the ads, ask for a key at contact@freesabai.com, then click Remove ads on the bar, paste the key into Ad-removal key and click Enter key. Keys are checked on your computer, without the internet.
Privacy
Auto Clicker keeps only your last settings (the beat, the mouse button, the points you marked and the hotkeys) on your computer to fill them in next time. Where and how often it clicks is neither recorded nor sent anywhere. It does not read what you type (it only learns that a hotkey you chose was pressed, by asking Windows for exactly that key), does not look at which program the clicked window belongs to, and runs no other program (no PowerShell, no cmd). Auto Clicker sends only a usage report at most once a day (a random ID for the installation that the program made itself, not taken from the hardware, the version, the Windows version, the Windows language and region, whether a key is in use, and how often each ad was shown). The first time it opens, the window shows a notice about this before anything is sent. Switch it off by clicking Usage statistics: on under ⚙️ Settings → Privacy. You are still told about new versions, because the latest version number comes with the ads the program already downloads. When you click to update the program, it downloads the new version from freesabai.com and sends nothing else. The full details are in our privacy policy.
Updating and removing
- When there's a new version of Auto Clicker, even with usage statistics off, a strip under the top of the window says the new version is out (Later hides the strip until the program is next opened and leaves an ⬆ Update to button with the new version number at the top of the window, next to ⚙️ Settings, for later). Click Update now on the strip, or that button, and the program asks first; click Update now and it downloads the new version from freesabai.com, checks our signature, then closes and starts again by itself. Your settings stay; other files in its folder are only replaced when they are Auto Clicker's own, such as the README.txt from the zip. (Click See the download page if you'd rather download it yourself from the program's download page on freesabai.com.)
- To check yourself at any time, go to ⚙️ Settings → Check for a new version (the program asks freesabai.com only when you click this button). If the check fails (for example without internet), the program opens its download page on freesabai.com. The program never downloads a new version without your click.
- If it can't update itself (for example its folder can't be written to, or the download fails the checks), it opens the program's download page on freesabai.com instead. You can also close the program and replace AutoClicker.exe with the new one; your settings stay.
- To remove: close the program and delete its folder. What it remembers about this computer (the language, the click settings, the ad-removal key and the random ID for the statistics) is in %LOCALAPPDATA%\AutoClicker; you can delete that too.
Problems and ideas
Found a problem, need another option, or want Auto Clicker to do more? Tell us on the feedback page. No sign-up needed.
Questions and answers
How do I make the mouse click by itself on Windows?
Open Auto Clicker, set the time between clicks (say, every second), choose the left, right or middle button, then move the mouse to the program you want and press F6 to start. Press F6 again to stop. The hotkey works from any window while Auto Clicker is open, and you can change it.
Can it click several places in turn?
Yes, up to three. Choose "Set points on the screen", set how many points, then point the mouse at each place and press F7 to mark them one by one. The program clicks point 1, 2, 3, then 1 again, with one beat between every click.
I pressed start and nothing is clicked, or a game ignores the clicks. Why?
Auto Clicker never clicks its own window: if the mouse or a marked point is on it, the program pauses and says why; move the window away and it goes on. A program or game started with Run as administrator cannot receive its clicks, because Auto Clicker does not ask for administrator rights. Games with anti-cheat may ignore the clicks or treat them as against their rules, so read the rules of the game first.
Does Auto Clicker read my keyboard or send what it clicks anywhere?
No. It only learns that the hotkeys you chose (such as F6 and F7) were pressed, by asking Windows for exactly those keys; it does not read what you type. Where and how often it clicks is neither recorded nor sent. All it sends is a usage report at most once a day (a random ID, the version, the Windows version and language), which you can switch off under ⚙️ Settings → Privacy.